In this final feature of a series of excerpts from a recent white paper published by Telenor Connexion, we look in detail at the difference between LTE-M and NB-IOT, as a guide to make the optimal choice for your business.
ARCHIVE FOR THE ‘connectivity’ CATEGORY
Dec 01, 2021 • Features • connectivity • Digital Transformation • GLOBAL • TELENOR CONNEXION • LTE-M • NB-IOT
In this final feature of a series of excerpts from a recent white paper published by Telenor Connexion, we look in detail at the difference between LTE-M and NB-IOT, as a guide to make the optimal choice for your business.
This feature is just one short excerpt from a white paper published by Telenor Connexion.
www.fieldservicenews.com subscribers can read the full white paper now by hitting the button below.
If you are yet to subscribe you can do so for free by hitting the button and registering for our complimentary subscription tier FSN Standard on a dedicated page that provides you instant access to this white paper PLUS you will also be able to access our monthly selection of premium resources as soo as you are registered.
Data usage note: By accessing this content you consent to the contact details submitted when you registered as a subscriber to fieldservicenews.com to be shared with the listed sponsor of this premium content Telenor Connexion who may contact you for legitimate business reasons to discuss the content of this white paper, as per the terms and conditions of your subscription agreement which you opted into in line with GDPR regulations and is an ongoing condition of subscription.
Adaptability to New Use Cases
When choosing a connectivity technology, the complete lifecycle of the connected product must be taken into consideration. Enterprises need to choose a technology that can grow with new use cases.
Imagine a product called “The connected door”. Initially it should just be possible to open and close the door and the door should send usage statistics every night to the cloud. The typical door has a lifecycle of 10 years. After just looking at the initial use case, the data amount is very low, so the focus is on technology with the lowest bandwidth and the door is mass produced and successfully launched. After three years the enterprise wants to monitise this success and add new value - the door should not just connect, but also interact with a parcel delivery service. For use cases where the application can be expected to evolve over time it is thus important that the whole solution has potential to develop. LTE-M provides greater potential to grow over time.
Due to its wider bandwidth LTE-M provides more adaptability to new use cases where the use cases of the IoT solution will develop over time. NB-IoT is an alternative when the requirements are more static and known from start.
Due to the shutdown of 2G and 3G networks in many parts of the world many legacy use cases need to be transferred to new connectivity technology.
We believe that 2G technologies will continue to be available in many parts of the world and outlive 3G. In Europe we anticipate 2G will be available until 2025, due to the legally required emergency services in the EU which depend on 2G technology.
As the coverage of LTE-M and NB-IoT deployments may not, as of today, be good enough everywhere, we recommend enterprises verify coverage in more detail and/or ensure devices are compatible with existing technologies as a backup.
IoT use cases will eventually move from old to new technology. As LTE-M meets or exceeds the technical characteristics of 2G/3G services, it appears to be a natural, evolutionary step. NB- IoT has lower responsiveness and limitations in mobility and may be relevant for use cases with lower requirements.
Global Availability
We believe that LTE-M will be the first to become a globally available technology as it has technically been designed for roaming from the start, like all other 2G, 3G, 4G and 5G technologies. NB-IoT was initially designed for static devices only, and roaming has been added later as afterthought.
Operators will be more reluctant to support incoming roaming NB-IoT devices that use network resources, but hardly generate revenue. Roaming on NB-IoT will most likely be limited to the business units within an operator group. We expect that LTE-M roaming will be available globally in the coming years, similarly to normal 4G roaming, and it is indeed already available today as a best effort offering on existing 4G roaming contracts.
LTE-M has been designed for roaming from the start and can leverage existing roaming and wholesale business models between operators. NB-IoT will require new business models to be a good alternative for global connectivity. Therefore we expect that LTE-M will be relevant for international IoT solutions earlier than NB- IoT.
Software Updates and Security
IoT devices can have a typical life span of 10 to 15 years. For many use cases it is desirable to update the software in the device several times over its lifecycle. Therefore, enterprises must choose a technology that can handle updates to work with modern software development practices - and to keep devices secure.
Enterprises typically use agile software development (small and frequent increments) to decrease time to market. This makes the waterfall approach to software development – where large software are deployed that are never touched again - a practice of the past.
The characteristics of NB-IoT mean it is not suitable for upgrading large fleets of IoT devices. This is expected to be addressed in a future version of NB- IoT, called NB2. In this variety software upgrades can be managed using multi-cast.
This means that there will be two varieties of NB-IoT available - NB1 and NB2 (also sometimes called LTE-cat NB1 and LTE Cat NB2). The current status is however that today most networks only support NB1, and it may take years before NB2 is widely available.
Increased security improvements and the agile software development methods used today, will continue to drive software updates. This has a large impact on the bandwidth consumption during the lifecycle of devices which is often underestimated. LTE-M is considerably better at handling device updates as its higher bandwidth can handle more data.
Moving Devices
Previous mobile technologies all support devices that can move around without connectivity being interrupted. Devices constantly measure radio signals of nearby radio towers (cells) in the network and dynamically and seamlessly adjust their signaling to different towers (cells). Here we see significant differences between NB-IoT and LTE-M.
NB-IoT is designed for static devices. It is designed to increase battery life by reducing measurement of signals to nearby radio towers (cells). When NB-IoT devices are moved, sessions may get dropped, or devices may need to reconnect. This can lead to interruptions and reduces battery life. This makes NB-IoT less suitable for moving devices.
LTE-M on the other hand is designed for moving devices, just like 2G, 3G, 4G and 5G. LTE-M can support moving devices without losing data sessions, at speeds of up to 200km/hr.
LTE-M is the better choice for moving devices as it has been designed for this from the start. As NB-IoT is designed for static devices it can lead to interruptions if devices are moved.
Remote Control Devices
If devices need to be remotely controlled, responsiveness is important.
Devices controlled by people need a fast and consistent response. LTE-M provides the same consistent response time as regular 4G, so it can be used by people to remotely control devices. NB- IoT is designed to send small amounts of data and is not designed for a fast response. With NB-IoT it may sometimes take up to 10 seconds to receive a response from a device.
Not all use cases need a fast response and it may for example be perfectly acceptable to wait 10 seconds for sensor readings.
When there is human interaction a slow response risk being perceived as poor usability, which could harm the brand perception of enterprises.
LTE-M is needed for a fast and consistent response, while NB-IoT can handle use cases where a delay of minutes is acceptable.
Voice Readiness
LTE-M is designed for voice and the specification includes Voice over LTE (VoLTE) - which is deployed by 194 operators in 91 countries.
Today however, VoLTE is not globally available in LTE-M networks and there are not many hardware modules that can support VoLTE over LTE-M. We expect that VoLTE will grow in importance in the coming years in LTE-M, just as it did in the consumer market for LTE.
The bandwidth and especially the responsiveness of LTE-M can also be used as an alternative to Voice over IP solutions. Devices need to respond quickly to calls and must be able to send and receive data at the same time (full duplex). Only LTE-M can support full duplex communication.
NB2 adds push to talk technology to NB-IoT, only one party can talk at any one time because the technology is half duplex, like walkie-talkies used to be.
LTE-M is designed for voice with Voice over LTE and can also be used for Voice over IP with full duplex. NB2 adds push to talk technology to NB-IoT but only at half duplex.
SIM Localisation - EUICC
Physically swapping the SIM card of deployed devices can be a costly and complicated process, especially in an IoT environment. SIM cards with eUICC technology allows switching of identity over the air, without the need for physical replacement of SIM cards.
When the life cycle of connected devices is longer than the commercial agreement with an operator, the eUICC technology makes a change of operator possible. eUICC can also be used for devices deployed in locations where roaming is not possible. While eUICC is still in an early stage today it will become a vital technology for large and international deployments of IoT devices.
Not all operators support the combination of NB-IoT and SMS which means that eUICC cannot be initiated in many networks. The bandwidth of LTE-M is also more suitable for transmission of SIM profiles, just like software updates. Enterprises considering eUICC should therefore also consider LTE-M.
Time to Market - Internet Competence
Time to market is essential when launching new products. Connectivity technology is only one aspect of the product. Access to people with the right competence is vital to ensure time to market which is why many enterprises choose common technologies over specialized technologies. Common technologies make product development faster, and product maintenance more cost efficient, because it is easier to get access to developers and other specialists.
The internet is built on technologies like IP, TCP, UDP and TLS. These protocols are familiar and easy to use for developers, as they hide much network complexity and are easy to scale without central control.
NB-IoT is designed to perform in local deployments, for example connecting streetlights in a city. Here it is not necessary to use standard internet technologies, such as IP.
Enterprises can access their devices through the Service Capability Exposure Function (SCEF) provided by the network operator. SCEF simplifies the access to devices by hiding the complexity of the operator’s network making device access familiar to application developers.
Today SCEF is available in some networks for local deployments. Enterprises that would like to use NB- IoT without IP would need to connect to all individual NB-IoT operators that support SCEF.
The roaming and interworking of SCEF is standardized, but it will take several years before SCEF are widely deployed and roaming is available.
LTE-M is using standard IP protocols which makes it straightforward to develop applications. NB-IoT is using tailormade protocols requiring specific application development and competence.
CONCLUSION AND RECOMMENDATIONS
Deciding between the new mobile connectivity technologies, LTE-M and NB-IoT, requires an understanding of the key differences between them.
LTE-M and NB-IoT are both globally available, vendor independent technologies, based on open standards. With the introduction of eUICC enterprises can take a commercial decision based on the most suitable technology and irrespective of operator.
Both LTE-M and NB-IoT enable relevant use cases and are telecom grade, which means they operate on dedicated radio frequencies in telecom networks with a proven capability to scale, and with committed support through the whole life cycle from the operator.
Both technologies also support improved battery life and substantial coverage enhancements, when compared to older mobile technologies.
For Most International Use Cases LTE-M is the Preferred Alternative
- LTE-M is the better alternative with respect to handling firmware and software updates that are expected during the lifecycle of the devices. LTE-M is built for roaming and has the best support for international deployments using a single point of contact and subscription for enterprises.
- Both LTE-M and NB-IoT have significantly improved indoor coverage compared with LTE.
- LTE-M is a better alternative for moving devices as it will not lose ongoing data transfers.
- LTE-M is prepared for voice technology and Voice over LTE.
- With LTE-M, devices can react in milliseconds if required, enabling use cases where a fast response is needed which is relevant for the usability of human-machine interactions.
Recommendations
Choosing the right connectivity technology is one of the critical decisions when implementing an IoT solution. The right choice is essential for deploying a well working solution in a cost efficient way and that can develop over time. New mobile IoT connectivity standards, LTE-M and NB-IoT, opens up for new and evolved use case by offering better coverage, longer lasting batteries and/or lower device cost. In addition they offer a future-proof path as 2G and 3G networks are gradually sunset across the world.
For most international IoT solutions LTE-M will be the preferred connectivity standard as it is expected to become globally available faster and to be more straightforward when developing and maintaining applications. NB-IoT may still be the better choice for some applications, -for example for very large scale sensor networks where the requirements are known at deployment and the best possible indoor coverage is absolutely essential.
As of today neither LTE-M nor NB-IoT are deployed widely enough to be solely relied on for international fleets of devices. For now it is recommended to use hardware that is able to use LTE-M or NB-IoT as well as networks with mature footprints, for example,
2G and/or 4G. The deployment status of mobile IoT network is developing rapidly and therefore the right setup will vary over time.
Independent on the choice of technology standard, Telenor Connexion can help you with all your connectivity needs. Get in touch to find out more about the first steps to take for your low-power, wide-area IoT application.
This feature is just one short excerpt from a white paper published by Telenor Connexion.
www.fieldservicenews.com subscribers can read the full white paper now by hitting the button below.
If you are yet to subscribe you can do so for free by hitting the button and registering for our complimentary subscription tier FSN Standard on a dedicated page that provides you instant access to this white paper PLUS you will also be able to access our monthly selection of premium resources as soo as you are registered.
Data usage note: By accessing this content you consent to the contact details submitted when you registered as a subscriber to fieldservicenews.com to be shared with the listed sponsor of this premium content Telenor Connexion who may contact you for legitimate business reasons to discuss the content of this white paper, as per the terms and conditions of your subscription agreement which you opted into in line with GDPR regulations and is an ongoing condition of subscription.
Further Reading:
- Read more about Digital Transformation @ www.fieldservicenews.com/digital-transformation
- Read more about Mobile Connectivity @ www.fieldservicenews.com/connectivity
- Read more about Telenor on Field Service News @ www.fieldservicenews.com/telenor
- Learn more about Telenor Connexion @ www.telenorconnexion.com
- Follow Telenor Connexion on Twitter @ twitter.com/t_connexion
- Connect with Telenor Connexion on LinkedIn @ www.linkedin.com/telenor-connexion-ab/
Nov 24, 2021 • Features • connectivity • Digital Transformation • GLOBAL • TELENOR CONNEXION • LTE-M • NB-IOT
In this second feature of a series of excerpts from a recent white paper published by Telenor Connexion, we look in-depth at the characteristics of LTE-M and NB-IoT technologies and how they will affect the market.
In this second feature of a series of excerpts from a recent white paper published by Telenor Connexion, we look in-depth at the characteristics of LTE-M and NB-IoT technologies and how they will affect the market.
This feature is just one short excerpt from a white paper published by Telenor Connexion.
www.fieldservicenews.com subscribers can read the full white paper now by hitting the button below.
If you are yet to subscribe you can do so for free by hitting the button and registering for our complimentary subscription tier FSN Standard on a dedicated page that provides you instant access to this white paper PLUS you will also be able to access our monthly selection of premium resources as soo as you are registered.
Data usage note: By accessing this content you consent to the contact details submitted when you registered as a subscriber to fieldservicenews.com to be shared with the listed sponsor of this premium content Telenor Connexion who may contact you for legitimate business reasons to discuss the content of this white paper, as per the terms and conditions of your subscription agreement which you opted into in line with GDPR regulations and is an ongoing condition of subscription.
LTE-M AND NB-IOT TECHNOLOGIES - INCREASED BATTERY LIFE, ENHANCED COVERAGE AND SIMPLIFIED HARDWARE
LTE-M and NB-IoT are designed to support IoT devices that need a long battery life or are used at locations that are difficult to reach with normal 4G technology, such as deep indoor locations.
So how are they different and how will they affect the market?
Battery Life and Increased Coverage
Battery life is increased by reducing the radio communications between device and network, and devices can go into sleep mode or listen less often to the network. LTE-M and NB-IoT both offer better coverage than 4G in, for example, deep indoor or remote areas.
There is however a trade-off between battery life, coverage and responsiveness. To leverage this requires access to new types of functionality in the network- for example PSM and EDRX use cases that need a fast response are less suitable for battery saving and enhanced coverage.
Likewise, devices that need a life cycle of 10 years need to be deployed in areas with good coverage. To support a balanced approach, battery saving and enhanced coverage are applied in step with each other. Significant improvement in battery life and coverage can be achieved by sleep mode and applying the right level of repetitions.
New Pricing Models Likely to Emerge
Pricing models for LTE-M and NB-IoT will likely be different to traditional telecom pricing because of the different traffic profile involved with IoT connectivity. There will be a vast number of connected LTE-M and NB-IoT devices but they will send low amounts of data. Rather than the data consumption per device price model, network providers will most likely consider charging access fees for devices on a per device basis for LTE-M and NB-IoT, or a combination of both, to better match the network resources consumed by these devices.
Hardware Simplification
LTE-M and NB-IoT both use simplified versions of regular 4G which reduces hardware complexity and cost once the technology is operating at scale.
GSMA maintains a list of modules that are commercially available at: https://www.gsma.com/ iot/mobile-iot-modules/ showing that the market for modules is fragmented into three main categories: modules supporting either LTE-M or NB-IoT and modules that support both LTE-M and NB-IoT.
LTE-M AND NB-IOT - GLOBAL AVAILABILITY AND OUTLOOK
Moving towards local availability in all countries
For global deployments of devices, enterprises need to take the life cycle of technology in consideration.
Global deployments need global availability, but new technologies are first locally available, typically in urban areas or with nationwide deployments. So when can we expect global availability for LTE-M and NB-IOT?
Today, the status for LTE-M and NB-IoT is that they are both locally available and on their way to becoming globally available.
We see that sometimes one operator in a region starts focusing on either LTE-M or NB-IoT, after which their competitors in the same region often offers the alternative.
We expect that in a few years both LTE-M and NB-IoT will be locally available in all countries.
Nationwide deployments are a good start but for global availability, commercial global roaming agreements between operators must be in place, so enterprises can deploy their devices using only one contract and one point of contact.
With 4G widely available and 5G around the corner, 2G and 3G are slowly being phased out. 2G technology is today still widely used in IoT solutions. 2G voice technology is used for voice calling, including emergency calls such as eCall - a European initiative for rapid assistance to motorists involved in a collision anywhere in the European Union. eCall was made mandatory in all new type-approved cars sold in the European Union from April 2018. As eCall mandates 2G voice, operators in the European Union cannot simply phase out 2G.
We expect that most European operators will support 2G until 2025. In North America, 2G is less widely available and certain countries in Asia and the Pacific have already phased out 2G.
LTE-M and NB-IoT are starting to become globally available, starting with LTE-M. We expect LTE-M and NB-IoT to be available during the complete lifecycle of 5G.
This feature is just one short excerpt from a white paper published by Telenor Connexion.
www.fieldservicenews.com subscribers can read the full white paper now by hitting the button below.
If you are yet to subscribe you can do so for free by hitting the button and registering for our complimentary subscription tier FSN Standard on a dedicated page that provides you instant access to this white paper PLUS you will also be able to access our monthly selection of premium resources as soo as you are registered.
Data usage note: By accessing this content you consent to the contact details submitted when you registered as a subscriber to fieldservicenews.com to be shared with the listed sponsor of this premium content Telenor Connexion who may contact you for legitimate business reasons to discuss the content of this white paper, as per the terms and conditions of your subscription agreement which you opted into in line with GDPR regulations and is an ongoing condition of subscription.
Further Reading:
- Read more about Digital Transformation @ www.fieldservicenews.com/digital-transformation
- Read more about Mobile Connectivity @ www.fieldservicenews.com/connectivity
- Read more about Telenor on Field Service News @ www.fieldservicenews.com/telenor
- Learn more about Telenor Connexion @ www.telenorconnexion.com
- Follow Telenor Connexion on Twitter @ twitter.com/t_connexion
- Connect with Telenor Connexion on LinkedIn @ www.linkedin.com/telenor-connexion-ab/
Nov 17, 2021 • Features • connectivity • Digital Transformation • GLOBAL • TELENOR CONNEXION • LTE-M • NB-IOT
In the first feature of a series of excerpts from a recent white paper published by Telenor Connexion, we look at the development and evoliution of mobile connectivity technologies.
In the first feature of a series of excerpts from a recent white paper published by Telenor Connexion, we look at the development and evoliution of mobile connectivity technologies.
This feature is just one short excerpt from a white paper published by Telenor Connexion.
www.fieldservicenews.com subscribers can read the full white paper now by hitting the button below.
If you are yet to subscribe you can do so for free by hitting the button and registering for our complimentary subscription tier FSN Standard on a dedicated page that provides you instant access to this white paper PLUS you will also be able to access our monthly selection of premium resources as soo as you are registered.
Data usage note: By accessing this content you consent to the contact details submitted when you registered as a subscriber to fieldservicenews.com to be shared with the listed sponsor of this premium content Telenor Connexion who may contact you for legitimate business reasons to discuss the content of this white paper, as per the terms and conditions of your subscription agreement which you opted into in line with GDPR regulations and is an ongoing condition of subscription.
Connectivity is a crucial part of product design and performance and the choice of connectivity technology must be considered early in the process. This is a challenging choice given the quick technology and market development. 5G technologies are around the corner, 2G and 3G networks are starting to be phased out and new network technologies that support LPWAN are starting to become globally available in the form of LTE-M and NB-IoT- also referred to as Mobile IoT.
For the first time networks have been developed to answer to the specific needs of connecting things. Previously, connected units have been communicating on infrastructure developed for consumer needs.
LTE-M and NB-IoT are standardized, secure, and operator-managed in licensed spectrum. They are designed for IoT applications that are low cost, use low data rates, require long battery lives and often operate in locations that are hard to reach.
LTE-M and NB-IoT will be the obvious choices for industries looking for 2G and 3G replacements for devices with long lifecycles, requiring extended device battery life and coverage.
Both technologies are good choices for deployments with expected lifespans of a decade or more, however there are differences between them which make each of them more suitable for some IoT applications rather than others.
So which one is the best choice for your application?
This guide describes the relative benefits and limitations of each technology to help enterprises to make the right selection for long-term success.
Here's a short overview of the development of mobile connectivity technologies. Mobile connectivity has evolved from being the infrastructure for human communication to telemetry, machine-to-machine and the internet of things applications.
-
The first version of mobile connectivity – 1G – introduced wireless voice.
-
In 2G, roaming and SMS messaging were introduced and were later enhanced with GPRS for data communication. SMS messaging and GPRS became widely used for basic telemetry. Roaming made mobile technology suitable for deployments in multiple countries. Telenor was one of the first operators to offer M2M communications with things connected over the 2G network as early as the 1990s.
-
3G became a truly global standard and combined the best of competing technologies in a single standard. 3G evolutions were mainly centered around high speed data applications.
-
4G introduced LTE technology used for devices constantly connected to the internet. 4G answered the consumer need for bandwidth and speed and introduced a new way to handle voice, replacing 2G voice.
-
LTE-M and NB-IoT (Mobile IoT) are especially designed for the Internet of Things. LTE-M and NB-IoT support devices that need a long battery life and devices that need good network access in areas that are difficult to reach.
- 5G networks use a combination of existing 4G LTE and new 5G New Radio (5G NR) technology. 4G and 5G have been designed to co-exist and applications designed for 4G, including LTE-M and NB-IoT, can be expected to have a very long life. Today most networks that claim to be 5G networks are in fact using 4G LTE.
- 5G enhances 4G in three main use case areas; enhanced mobile broadband, critical communications and mobile IoT.
-
Enhanced mobile broadband is currently targeted towards consumers that need ever-increasing bandwidth. It also enables new IoT use cases that require high data volumes, for example streaming video.
-
Critical communications demands a much faster response and increased quality of service and security. 5G introduces 5G New Radio Technology which uses a higher radio frequency.
-
Mobile IoT - LTE-M and NB-IoT - are forward compatible with the 5G NR technology, which means that LTE-M and NB-IoT technology can be used throughout the complete 5G life cycle.
This feature is just one short excerpt from a white paper published by Telenor Connexion.
www.fieldservicenews.com subscribers can read the full white paper now by hitting the button below.
If you are yet to subscribe you can do so for free by hitting the button and registering for our complimentary subscription tier FSN Standard on a dedicated page that provides you instant access to this white paper PLUS you will also be able to access our monthly selection of premium resources as soo as you are registered.
Data usage note: By accessing this content you consent to the contact details submitted when you registered as a subscriber to fieldservicenews.com to be shared with the listed sponsor of this premium content Telenor Connexion who may contact you for legitimate business reasons to discuss the content of this white paper, as per the terms and conditions of your subscription agreement which you opted into in line with GDPR regulations and is an ongoing condition of subscription.
Further Reading:
- Read more about Digital Transformation @ www.fieldservicenews.com/digital-transformation
- Read more about Mobile Connectivity @ www.fieldservicenews.com/connectivity
- Read more about Telenor on Field Service News @ www.fieldservicenews.com/telenor
- Learn more about Telenor Connexion @ www.telenorconnexion.com
- Follow Telenor Connexion on Twitter @ twitter.com/t_connexion
- Connect with Telenor Connexion on LinkedIn @ www.linkedin.com/telenor-connexion-ab/
Feb 28, 2020 • News • 5G • connectivity • Industry 4.0 • smart factory • smart manufacturing
Smart manufacturing sector could benefit from collaboration.
Smart manufacturing sector could benefit from collaboration.
Ericsson and Telenor Sweden have signed an agreement making Telenor the first mobile network operator worldwide to join the Ericsson Industry Connect partner program and become a reseller of Ericsson Industry Connect.
Industries and enterprises are transforming as the digitalization of their processes, products and services accelerate. Highly reliable mobile broadband with the capabilities of 4G and 5G is becoming increasingly more important for industries to improve efficiency and flexibility in their operations, drive innovation and to stay competitive.
With this new agreement, Telenor Sweden’s industrial customers will now be able to explore and utilize the full potential of IT-centric LTE networks customized for smart manufacturing applications. This agreement is a significant step, paving the way for future 5G applications across the sector.
Ericsson’s partner program provides a vehicle for communications service providers to resell connectivity technologies to their customers. It also enables independent software vendors, system integrators and tech device partners to offer software, services, and devices as part of the Industry 4.0 ecosystem.
Kaaren Hilsen, CEO, Telenor Sweden, said: “We are proud to be the first operator joining Ericsson´s Industry Connect partner program and are ready to play a pivotal role in this exciting sector. The manufacturing industry is one of the first to truly reap the benefits of 5G, and this partnership extends our portfolio with a solution that allows Telenor Sweden to capture new opportunities in industrial verticals and improve business outcomes for our customers.”
Åsa Tamsons, Senior Vice President and Head of Business Area Technologies & New Businesses, Ericsson, said: “Industry 4.0 needs secure, reliable, wireless connectivity. By leveraging our 4G and 5G capabilities and adopting Ericsson Industry Connect, Telenor Sweden can now offer its industrial customers a unique cellular connectivity solution that increases efficiency and productivity for the smart factories of the future.”
Nov 01, 2019 • News • 5G • connectivity • Mobility • Ericsson
Bharti Airtel’s Core network to be enhanced with the deployment of Ericsson Cloud Packet Core.
Bharti Airtel’s Core network to be enhanced with the deployment of Ericsson Cloud Packet Core.
Jun 18, 2019 • News • connectivity • future of field service • Mining
The total active installed base of connected mining solutions reached almost 0.6 million units in the equipment, people and environment segments in 2018...
The total active installed base of connected mining solutions reached almost 0.6 million units in the equipment, people and environment segments in 2018...
The equipment segment accounts for the largest share of the total, representing connected units deployed on machines and vehicles used in mining operations, according to new research from Berg Insight. This includes solutions ranging from OEM telematics systems on mining equipment to advanced connected solutions supplied by mining technology specialists.
The people segment includes various solutions deployed to support the safety and productivity of mining personnel, while the environment segment consists of sensor technology implemented for environmental monitoring of the mine itself. Growing at a compound annual growth rate of 15.5 percent, the total installed base of connected mining solutions in all these segments is forecasted to reach close to 1.2 million units in 2023.
The top players active in the connected mining space include strikingly different types of companies, ranging from specialised independent technology suppliers of varying sizes up to the leading mining equipment manufacturers.
“Many of the key players today serve both surface and underground mining customers”, said Rickard Andersson, Principal Analyst, Berg Insight. The surface segment is dominated by Modular Mining Systems (owned by Komatsu), Hexagon Mining, Wenco International Mining Systems (owned by Hitachi Construction Machinery) and Caterpillar through its Cat MineStar suite. “Modular, Hexagon and Caterpillar all serve underground customers in addition to a primary presence in the surface segment, while Wenco is fully focused on surface mining”, continued Mr. Andersson. He adds that VIST Group is also active in the surface segment and serves some underground operations as well.
Examples of key technology providers focused specifically on underground applications are Newtrax Technologies (recently acquired by Sandvik) and Mobilaris (partially owned by Epiroc). The underground segment is in general less mature and more fragmented. “Mine Site Technologies, MICROMINE and rapidBizApps are additional players in the underground segment that all also serve surface customers to varying extents”, concluded Mr. Andersson.
The equipment segment accounts for the largest share of the total, representing connected units deployed on machines and vehicles used in mining operations, according to new research from Berg Insight. This includes solutions ranging from OEM telematics systems on mining equipment to advanced connected solutions supplied by mining technology specialists.
The people segment includes various solutions deployed to support the safety and productivity of mining personnel, while the environment segment consists of sensor technology implemented for environmental monitoring of the mine itself. Growing at a compound annual growth rate of 15.5 percent, the total installed base of connected mining solutions in all these segments is forecasted to reach close to 1.2 million units in 2023.
The top players active in the connected mining space include strikingly different types of companies, ranging from specialised independent technology suppliers of varying sizes up to the leading mining equipment manufacturers.
“Many of the key players today serve both surface and underground mining customers”, said Rickard Andersson, Principal Analyst, Berg Insight. The surface segment is dominated by Modular Mining Systems (owned by Komatsu), Hexagon Mining, Wenco International Mining Systems (owned by Hitachi Construction Machinery) and Caterpillar through its Cat MineStar suite. “Modular, Hexagon and Caterpillar all serve underground customers in addition to a primary presence in the surface segment, while Wenco is fully focused on surface mining”, continued Mr. Andersson. He adds that VIST Group is also active in the surface segment and serves some underground operations as well.
Examples of key technology providers focused specifically on underground applications are Newtrax Technologies (recently acquired by Sandvik) and Mobilaris (partially owned by Epiroc). The underground segment is in general less mature and more fragmented. “Mine Site Technologies, MICROMINE and rapidBizApps are additional players in the underground segment that all also serve surface customers to varying extents”, concluded Mr. Andersson.
Mar 20, 2019 • Augmented Reality • connectivity • Data • Future of FIeld Service • Workforce • Bill Pollock • Cloud services • FieldAware • IoT • skills • Strategies for GrowthSM • The Big Discussion • Marc Tatarsky • SimPRO • Waste Management
Concluding our series our experts, Bill Pollock, Strategies for Growth, Marc Tatarsky at FieldAware, and Richard Pratley from SimPRO, identify potential areas of concern for service companies to look out for in 2019.
Concluding our series our experts, Bill Pollock, Strategies for Growth, Marc Tatarsky at FieldAware, and Richard Pratley from SimPRO, identify potential areas of concern for service companies to look out for in 2019.
What is the biggest area of concern that field service companies should address in the next 12 months?
BILL POLLOCK, PRESIDENT, STRATEGIES FOR GROWTH
The biggest area of concern for field service companies in the next 12 months will be, if they’re already somewhat behind the technology curve (or with respect to the competitive landscape), what do they need to do today to ensure that they will not fall further behind? And, it’s not just a matter of technology either; many FSOs will need to alter their corporate philosophy and mentality as well.
Technology goes hand-in-hand with the personnel that use it, so attention must also be given to how the organisation goes about replacing, and/or supplementing, its existing field force with new hires or the use of outside, third-party “feet on the street” support.
The services world is evolving so quickly, that any missteps along the way can be devastating – so every step, every move counts.
There will also be no time for any intra-mural infighting – only for collaboration and inter-departmental cooperation. Equipment will keep on breaking, and end-of-lifecycles are getting increasingly shorter. As such, there will always be the need for services organisations to deliver their support! However, only those that have the technological and corporate wherewithal to continually improve the way in which they deliver their services will rise to the top of the competitive order – and stay there!
MARC TATARSKY, SVP MARKETING, FIELD AWARE
The phrase ‘doing more with less’ is common in field service and that can be in relation to numerous resources and assets.
The workforce is a key element in this equation and can preoccupy a great deal of management time. There are concerns over an aging workforce in field service, a high turnover of workers and a shrinking pool of talent as demand increases.
Technology plays a critical role in any succession and resource planning. This may be empowering the workforce with automation to streamline operations, bring in best practice and increase productivity without the need to increase numbers. Using technology differently or embracing emerging technologies to enable remote expert capabilities, so a more experienced worker assists others.
Also attracting new workers, especially millennials, for whom, the latest technology is a big part of everyday life. The technology has to be right for both worker and the organisation to get maximum benefit
RICHARD PRATLEY, MANAGING DIRECTOR UK, SIMPRO
Technology is changing at a rapid pace. The technology we use today is very different from that we used five years ago so businesses will always have the challenge of how they can ensure the systems and technology they use are still current. Taking a long term view of the business requirement is vital.
Many businesses consider an off-the-shelf solution won’t fit the unique needs of the business. But think again! Overtly customised solutions can lead to restrictions with software updates and integrations with other systems in the future - not to mention a great deal of ongoing expense and time that should be spent on running the business.
Cloud-based software providers frequently release new updates (that are included in the licence fee) to help businesses stay ahead of tech trends. By ensuring the systems you use now are fit for-purpose, you’ll be able to keep up with future technological developments.
You can read the first instalment of The Big Discussion here, the second here and the third here.
Mar 11, 2019 • Augmented Reality • connectivity • Data • Future of FIeld Service • Workforce • Bill Pollock • FieldAware • IoT • skills • Strategies for GrowthSM • The Big Discussion • Marc Tatarsky • SimPRO • Waste Management
In the third of our four-part series, our industry experts Bill Pollock, Strategies for Growth, Marc Tatarsky at FieldAware, and Richard Pratley from SimPRO, identify key areas of focus for field service managers in 2019.
In the third of our four-part series, our industry experts Bill Pollock, Strategies for Growth, Marc Tatarsky at FieldAware, and Richard Pratley from SimPRO, identify key areas of focus for field service managers in 2019.
What do you think should be the key areas of focus for field service managers across the next twelve months?
BILL POLLOCK, PRESIDENT, STRATEGIES FOR GROWTH
The next most important areas of focus for field service managers in the coming 12 months will likely be among the following three items:
(1) embracing the “new” technologies to support an expanded and enhanced capability to deliver their respective service offerings. Artificial Intelligence (AI) and Machine Learning have been around for more than 50 years, but are still relatively new to the services segment – but, it’s time to build them into your service operations!
(2) Changing the way in which you deliver – and price – your service offerings. Traditional break/fix service is essentially “dead”. Long live predictive diagnostics and predictive maintenance! Have you spoken to any chat bots lately? Well, you will!
(3) Re-engineering the way you measure performance metrics, or KPIs. MeanTime Between Failures (MTBF) and Mean-Time-to-Repair (MTTR) will not mean anything in an environment where services are being performed remotely on an ongoing basis. It will be time to replace some of the old “tried and true” KPIs with new ones that can measure systemic productivity, rather than merely individual field technician productivity. It’s time to rethink the entire service delivery process – and adjust to it!
MARC TATARSKY, SVP MARKETING, FIELD AWARE
Integration capability tops software selection criteria consistently for field service leaders. Even those who have been hesitant to integrate in the past, can now see that integration capabilities are far more advanced. Working with the right FSM software creates rapid time to value and ensures minimal risk.
Essentially the integration of FSM solutions into existing business systems of record means there is no disruption to ERP, CRM and accounting systems. Ultimately the real value is delivered through synchronized workflows, enhanced reporting and extending results beyond the current systems. Data integration yields actionable outcomes and connectivity to the wider business.
Field service has long been seen as simply a business cost, but leaders now recognise that integration can elevate their service operation, transforming it to a value-driving organisation that delivers broader business results. The evolution of field service through integration should be a focus to unlock this business value.
RICHARD PRATLEY, MANAGING DIRECTOR UK, SIMPRO
We continue to see businesses turning to software and technology to improve the efficiency of their workforce and to support customer service.
Smart connected products and IoT technology is transforming field service operations and we’ll see more adoption of this over the next twelve months. The predictive model not only reduces the cost of reactive maintenance but it addresses any issues before they become critical. For the customer, they won’t ever need to worry about needing to deal with a broken asset ever again.
We already have a number of customers running trials of our IoT technology. Not only are they winning new contracts off the back of it but it’s helping to increase the lifetime value of their existing customers.
The final part of The Big Discussion. You can read the first instalment here, and the second here.
Feb 28, 2019 • News • connectivity • Future of FIeld Service • cloud • Data Centres
IX Reach, the leading provider of SDN cloud connectivity, remote peering and Ethernet services to more than 170 global locations is proud to announce its network expansion into East Africa in partnership with the Djibouti Data Center.
IX Reach, the leading provider of SDN cloud connectivity, remote peering and Ethernet services to more than 170 global locations is proud to announce its network expansion into East Africa in partnership with the Djibouti Data Center.
Djibouti Data Center (DDC) has been selected as the strategic hub for IX Reach’s African expansion owing to its excellent reputation and unique position as the first and only Tier 3 carrier neutral ecosystem in east Africa with direct access to all major international and regional cable systems connecting Africa to Europe, Middle Eastern, and Asian markets.
“We are delighted to call Djibouti Data Center a new Point of Presence (PoP) on our network”, said Simon Vye, CEO at IX Reach. “IX Reach is dedicated to increasing connectivity, collaboration and innovation as well as improving the range of services we provide to our customers.This new partnership with DDC is key in continuing our vision of making our full portfolio of solutions including cloud connectivity just one cross connect away on the IX Reach network.”
DDC tenants will be able to connect directly onto IX Reach’s global network giving access via a single port to over 50 Internet Exchanges and Direct Connect into the industry’s leading Cloud Service Providers. Given the geographical importance of Djibouti, IX Reach will also be able to address markets in other African countries improving global connectivity and reach.
"We are very excited to have IX Reach join the carrier neutral DDC ecosystem, and to be enhancing the DDC’s available network footprint for our global customer base as well as Africa’s growing and emerging markets,” said Anthony Voscarides, CEO of the Djibouti Data Center. “In addition to the DDC’s market leading access in east Africa to international and regional fiber cable systems, the new IX Reach PoP will further enhance connectivity options to a diverse network of major Internet Exchange Points, cloud service providers, and data centers across Europe, North America, and Asia Pacific regions.”
The expansion into a new continent continues to highlight IX Reach’s global ambitions and increased investment into its network and services demonstrating its dedication to meeting the global challenges of increased data use driven by the growth of video streaming, content delivery, IoT, big data and AI technology.
Field Service News is published by 1927 Media Ltd, an independent publisher whose sole focus is on the field service sector. As such our entire resources are focused on helping drive the field service sector forwards and aiming to best serve our industry through honest, incisive and innovative media coverage of the global field service sector.
Leave a Reply